Ultra-Shear Parting Tool Ci★★★★★ ★★★★★ 1 Review
Crisp, Clean, Narrow Parting Cuts -- Ultra-Shear’s New Parting Tool Ci.
Woodturners love narrow parting tools because they allow you to get more turning from less stock, they cut with less resistance and they open up other design options (like the grooves of a honey dipper). The problem is, the thinner parting tools get, the harder they are to sharpen. Get the end just a little out of square and the tool won’t cut straight. If the edges get a little rounded over, you’ll get tear-out at the entry point. The Ultra-Shear Parting Tool Ci changes all that by eliminating sharpening altogether. Instead, the cutting edge is a nano-grain carbide insert, ground on computerized equipment, polished to a razor-like edge and replaceable in seconds.
As if a thin-kerf carbide parting tool wasn’t enough, we also fluted the insert, creating a profile that makes an incredibly clean entry cut on even the trickiest woods; from open-grained softwoods to ultra-dense tropicals…they all cut cleanly. If you need a perfectly flat bottom, there’s an optional fully-square carbide insert.
The carbide insert is just slightly under 3/32" (.0825" to be precise). The blade holding the insert is 1/16". The difference gives you .010" (“ten thou” in engineer-speak) clearance on each side of the blade. Bottom line, with that clearance you’ll never burn your project or your tool again.
We also designed the blade holder to keep the inserts where they belong. The other insert parting tools on the market use inserts designed for metalworking machinery. The geometry of those inserts relies on consistent pressure from exactly the same contact point to keep the insert seated. Put them in a hand-held tool and it doesn’t take much of a slip for the insert to fly out. But, Ultra-Shear’s re-designed geometry takes the wedge-theory and improves it with a profiled feature that grips the insert securely, even at odd approach angles.
We patterned the handle and blade after thin-kerf parting tools first made popular in England in the 1980s. The tall blade resists twisting and bending. The short blade length and knife-style handle give you comfortable, confident control over the cut.
If you’re looking for a parting tool that cuts clean each and every time you pick it up, and never needs sharpening, Ultra-Shear’s Parting Tool Ci is for you. MADE IN THE U.S.A.
WARNING: This product can expose you to chemicals including Bisphenol, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shipping Charges and Policies
In United States (including Alaska and Hawaii): $7.99 flat rate charge per order. Packages will be sent by UPS,priority mail or first-class mail at the company's discretion based on weight and value. All packages are insured. Premium services such as UPS next day or second day shipments will be billed at actual charges plus the $7.99 flat rate fee.
Now Offering Free Shipping on orders of $250 or more. Free standard shipping is eligible on all orders of $250.00 or more being shipped to addresses in the United States including Alaska and Hawaii. Shipping / Taxes do not count toward the $250.00 qualification. Item(s) must equal up to $250.00 or more. There will be no special code to receive the free shipping but you must select FREE SHIPPING as the shipping option during checkout.
Alaska and Hawaii: All packages will be sent by priority mail insured. Actual charges plus the $7.99 flat rate charge will be billed at time of shipment. We can also ship UPS next day and 2nd day service at additional charges.
Canada: Canadian Shipping is $27.95 and is subject to certain limitations described below. Method: All Canadian orders are shipped via United States Postal Service, International Flat Rate. Time: Most Canadian orders are shipped within 1 business day after the payment for your order is received. Orders that do not meet the limitations described below, will delay shipping. Limitations: Canadian orders are shipped in a Flat Rate Envelope. A box is placed inside this envelope and the maximum dimensions of the box are 9 x 6 x 2 inches. Also, the entire package cannot weigh more than 4 pounds. If your order is too large for a single box, We will contact you to see if you would like to pay for an additional package. Additional packages are $27.95 each. Insurance: Insurance is available for Canadian orders and can be purchased by stating in the comment section during checkout, we will email with additional costs. The Berea Hardwoods Co. Inc. assumes no liability for orders after they have been mailed. We can also ship UPS service at additional charges.
Duties/Tarrifs/Fees/Etc All duties, tarrifs, and any other fees imposed by the local government and/or postal system are the sole responsibility of the buyer.
If you are in Europe you may order from our distributor at:
All Other Countries. Foreign (non-Canadian) Shipping is $39.95 and is subject to certain limitations described below. Method: All Foreign (non-Canadian) orders are shipped via United States Postal Service, International Flat Rate. Time: Most Foreign (non-Canadian) orders are shipped within 1 business day after the payment for your order is received. Orders that do not meet the limitations described below, will delay shipping. Limitations: Foreign (non-Canadian) orders are shipped in a Flat Rate Envelope. A box is placed inside this envelope and the maximum dimensions of the box are 9 x 6 x 2 inches. Also, the entire package cannot weigh more than 4 pounds. If your order is too large for a single box, We will contact you to see if you would like to pay for an additional package. Additional packages are $39.95 each. Insurance: Insurance is available for Foreign (non-Canadian) orders and maybe limited by some countries, Insurance can be purchased by stating in the comment section during checkout, we will email with additional costs or if no insurance is available for that specific country. Berea Hardwoods Co. Inc. assumes no liability for orders after they have been mailed. We can also ship UPS service at additional charges.Duties/Tarrifs/Fees/Etc All duties, tarrifs, and any other fees imposed by the local government and/or postal system are the sole responsibility of the buyer.
Due to postal regulations we cannot ship the following items overseas or to Alaska or Hawaii
- Hut Crystal Coat
Return Policy We, at The Berea Hardwoods Co. Inc., take great pride in the quality of our products. If you are not 100% satisfied with your purchase, you may return it within 30 days of purchase for a full refund of the purchase price. To return a product, please call or email our Customer Service Department at 877-736-5487 or firstname.lastname@example.org to obtain a Return Merchandise Authorization (RMA) number and shipping instructions. Write the RMA number on the outside of the box or envelope. Ship the product back to us and we will process your return promptly. Do not return any item to us without authorization. Unless the product being returned is defective or is not the item you ordered, you are responsible for the shipping charges incurred when returning any product. All items accepted for return must include all original instructions and packaging. Pen and project components will not be accepted for return unless originally purchased as components. Items that have been abused or modified from their original condition may not be accepted. Once your return is received and inspected (usually within 48 hours of receipt), your refund will be processed and a credit will be automatically applied to your credit card or original method of payment within 7 days. Please note that depending on your credit card issuer or bank, it may take an additional 2-10 business days after your credit is applied for it to post to your account.